I would love to see a video of one of the lovely models riding the top of a car with riding boots. Ideally the car (like a tiny Fiat or Polo) is small enough for her to fully straddle the roof with her boots over the sides. If necessary, the model(s) can use a heavy hammer to break in the sides of the roof to make it easier for the rider to fully straddle. (Please be careful of any potential sharp edges!) During the ride, another model can be jumping on the rear bumper, to bounce the car vigorously up and down, so the rider on top can bounce in her roof "saddle" like riding a wild horse. The camera can show the roof undulating up and down under her bottom from the bouncing...need to hear the sound of the crumpling roof. The two (or more) can switch places for each to enjoy the ride. For added effect, "reins" can be tied to the front of the car, and the rider can be pulling hard on them. Would be wonderful if they could ride it so hard that the roof crumples deeply into the saddle shape. Hope you enjoy!
top of page
bottom of page
Hi,
We would be happy to make your custom video, I see your mail sended to girlsvscars.official@gmail.com, let's discuss about your project :)
But remember custom video are not free to make.
The GVC Team
Just an idea for crushing the top into saddle: I actually saw this many years ago where an old VW van was strapped to a flatbed tow truck, likely being transported to the scrapyard. The van had a chain slung over the middle of the top from one side to the other and tightened to the point where the roof was crushed severely downwards. The first thing that came to mind when I saw it drive by was I wished a girl could have ridden on it crushed saddle-like shape.
I think this could be repeated as part of a new video. My suggestion is to place a long steel or heavy wood beam under the middle of the car with the ends protruding on both sides. Then secure a heavy duty nylon strap (with ratching tighteners - like are used to strap down cargo) on a one end of the beam, sling it over middle of the roof, and secure to the other end of the beam. Then start tightening the strap until the roof collapses to the desired depth for your model to comfortably straddle and ride on. You might want to place heavy foam between the strap and roof edges to protect the nylon (and most importantly, the model who rides) from harm from potential sharp edges. The foam would also concentrate the force on the sides of the roof so they collapse first, as well as distribute the pressure to a larger area, to give the roof a more saddle-like shape.
Just an idea.
Happy riding!